Gymnasium equipment by Courtsports
Architects and owners who demand quality workmanship, superior performance, and aesthetically pleasing design depend upon the specification of custom gymnasium equipment offered by Courtsports Inc.. All products are designed to provide years of dependable service and to compliment the decor of your facility. From aircraft carriers to university fieldhouses to elementary school gyms.
BASKETBALL COMPLETE BACKSTOPS
COURTSPORTS - SERIES 100 CENTER STRUT
- Most widely used in the Industry
- Clean lines, aesthetically pleasing appearance
- Conceived by Aalco in the late 50’s
- All welded rigid construction up to 30'
- Direct-mount goal feature is standard
- Application up to 60'
- 25-year structure warranty
Custom Colors Available on All Backstops
Industry Leading Components
- 3/16 x 3 1/2 steel beam clamps
- Die-formed mig welded
- Full contact double compression
- 1/4 x 2 1/2 formed bottom pipe clamps
- Self-locking whiz nuts
- All-plated hardware
- Heavy steel hinge fitting
- Solid steel bearing surface
- Self-locking whiz nuts
- All Aalco backstops are custom engineered. No hinge adjustments needed.
- 1/4 x 2 1/2 steel pipe clamps provide the most rigid in the industry
- All zinc plated hardware
- All-welded
COURTSPORTS - ROLL FOLD
- Specified by leading architects around the country
- Available with both electric operation or manual operation
- Available with any board and goal combination
- Compact folding design with storage toward the gym perimeter
- Most sensible design in the industry
- Top of the unit rolls forward avoiding rear obstruction
- Folds unit away from center court eliminating volleyball conflict
- 1/4 x 2 1/2 pipe clamps
- 5/8 solid steel ring
- 1/4-7 x 19 aircraft cable
- 7000 lb. tear strength
- Steel thimble
- 2 1/4 cable clamps
- 1/4 x 2 1/2 pipe clamps
- 5/8 solid steel ring
- Full 360° rotating pulley
- 3 1/2 OD sleeve with bearing
COURTSPORTS - SERIES 2000 SOLO-GLIDE
- Series 2000 Solo-Glide
- Unique internal design is the most durable height adjuster in the industry
- Patented rugged design eliminates problems associated with bolt on systems
- Main mast constructed from heavy 6"x6" square steel tubing
- Extruded aluminum internal telescoping ram for smooth operation
- Direct mount to goal attachment on all backboards
- Manual or electric operation
- 10' to 8' adjustment
- Height gauge for adjustments between 10' and 8'
- 25-year warranty on most components
The Series 2000 Solo Glide provides ceiling suspended Backstops with an Internal Height Adjustment feature. With the rising popularity of adjustable goals, Courtsports has taken the height adjustable backboard to a new level. With the constant abuse that an 8' goal invites, Courtsports has designed a unit that transfers the load of anyone hanging or dunking on the rim directly to the structure itself. With this design, your system will provide you with years of maintenance free adjustment. Equipment is designed with the end user in mind. Technology is so advanced this will be the last height adjuster system you will buy.
Operation Options
- Electric hand-held wand (plugs into any wall outlet)
- Remote key switch (motor and key switch hard-wired to building)
- Radio controlled with transmitter (motor hard-wired to building)
- TouchMate control screen (motor hard-wired to building)
- Manual hand crank (removable handle)
Models
2000-FS Forward fold rear braced
2000-FJK Forward fold front jackknife braced
2000-BS Rear fold back jackknife braced
2000-RF Roll-fold back jackknife braced
2000-SF Side fold side jackknife braced
2000-B Stationary rear braced
2000-WB Stationary wall brace
2000-SF Side fold (as shown to the right) actuates a double backboard application with a single motor unit. Ideal for center court locations when multiple shooting stations are desired.
COURTSPORTS - SERIES 200 DOUBLE DROP
- Traditional design
- All-welded construction
- Clear view design
COURTSPORTS - WALL SWING-UP: 22WS
This is an economical swing-up where ceiling height of 12' 10" plus the length of extension permits raising. The offset hinges enable the backstop to fold flat against the wall. It is raised by either a manual or electric winch. This is designed for extensions up to 12'. Please specify extension.
Models
24WS-501 Rectangular glass backboard
24WS-601 Fan-shaped fiberglass backboard
24WS-901 Rectangular fiberglass backboard
COURTSPORTS - SIDE FOLD: 22SF
This is a folding backstop even more economical than the 24WS for use where swing-up folding is obstructed or where folding would be infrequent. No winch is required. A tie-brace is unlatched for folding. Extensions are from 3' to 12'. Please specify extension.
Models
22SF-501 Rectangular glass backboard
22SF-601 Fan-shaped fiberglass backboard
22SF-901 Rectangular fiberglass backboard
COURTSPORTS - WALL STATIONARY: 20SW
This is the simplest and most economical basketball backstop. Ideal for use to extend the backboard from 1' to 10' from the wall. Extensions of 7' or more require a wall of 8" concrete block or reinforcement for broad distribution of the load.
Models
20SW-501 Rectangular glass backboard
20SW-601 Fan-shaped fiberglass backboard
20SW-901 Rectangular fiberglass backboard
BASKETBALL BACKBOARDS
COURTSPORTS - RECTANGULAR GLASS: 501SUB
- Official 42" x 72" regulation size
- 1/2" tempered glass
- Extruded aluminum frame
- Fired border and target
- Limited lifetime warranty
- Weight: 220 lbs.
Compatible with 28HS4 or 27H
COURTSPORTS - RECTANGULAR FIBERGLASS: 091S
- Official 42" x 72" regulation size
- Fiberglass construction over a solid wood core, 1 1/2" total thickness
- Inlaid border and target
- Same rebound as glass
- Limited lifetime warranty
COURTSPORTS - FAN SHAPED FIBERGLASS: 601
- Official 39" x 54" regulation size
- Fiberglass construction over a solid wood core, 1 1/2" total thickness
- Inlaid border and target
- Same rebound as glass
- Limited lifetime warranty
BASKETBALL RIMS
COURTSPORTS - INFINITY PRESSURE RELEASE GOAL: 28H-TT
- Meets current NCAA Division I rulings
- Positive lock mechanism
- Cobra track technology provides the most dependable positive lock mechanism in the industry
- 1/4" wrap around brace material
- Tube tie net hangars standard
- Powder coated finish
- Convenient release pressure adjustment screw
- Limited lifetime warranty
COURTSPORTS - SAFE RELEASE GOAL: 28HS4
- Meets all NCAA and NFHS requirements
- Positive latch mechanism
- Powder coated finish
- Continuous net lacing wire
- Optional tube tie net attachment available
COURTSPORTS - 27H-II AND 27H
27H-II
- High strength front mount rim
- 800 lbs. load capacity
- Heat treated for superior strength
- Standard rim design
- Perma-lace continuous lacing
27H
- Standard rim design
- Standard net hanger
- Meets all NCAA and NFHS standards
PROTECTIVE BACKBOARD PADS
COURTSPORTS - PRO GUARD PROTECTIVE BACKBOARD PADS
- Heavy-duty bolt-on design
- Molded skin urethane
- Mounts easily to all glass boards
- Available in 10 colors
- 5-year unconditional warranty
- Meets all NCAA and NFHS standards
VOLLEYBALL EQUIPMENT
COURTSPORTS - SWINGLINE CEILING SUSPENDED VOLLEYBALL
A
- Custom designed ceiling suspended volleyball systems
- Available with either electric operation or wall-mounted manual winch
- Internal net height adjustments
- Single or multiple court design
- Electric operation available in key switch, radio control or the TouchMate
- Conveniently folds to overhead storage position
- Safety catch standard on all systems
- Custom colors available
- 25-year structure warranty
B
- Simple telescoping stabilization bars standard on all systems
- Floor anchors or sleeves are not required
- Stays attached to the system, no disassembly required
- Optional Judges Stand provides clear view of court system
- Heavy-duty welded tubular frame design
- Moves vertically with net height
- Fully padded, meets all NCAA and NFHS standards
- Comfortable seat pad standard on all units
- Red pads standard, custom colors available
- Patented internal height adjustment feature allows you to adjust the net height while at full tension
- Extruded aluminum design for years of trouble-free operation
- Safe and simple worm gear winch design achieves proper net tension
- Quick-Tite™ draw straps standard on all systems
COURTSPORTS - SPIKELINE VOLLEYBALL
A simple turn of the handle adjusts
the net height while at full tension.
- Patented system allows you to adjust the net while at full tension
- Internal bevel gear drive mechanism allows exact net height with the turn of the handle
- Safe and simple worm gear winch design achieves proper net tension
- 10-year limited warranty
- Winch post 48 lbs., end post 40 lbs.
- Outer telescoping design
- Aluminum anodized finish
SLS-99C–Single competition center standard,
48 lbs.
SLS-99WP–Competition volleyball standard complete with post pad, 105 lbs.
SLS-99CWP–Competition volleyball center standard complete with pad, 58 lbs.
SLS-99P Complete Package–1 pair of competition standards complete with pads, 1 competition net, 6 Quick-Tite™ net draw straps, 2 official antennas, 2 official markers, 1 judges stand complete with pads, 160 lbs.
COURTSPORTS - POWER POST GOLD SYSTEM: APPS
- Extruded aluminum design
- Internal telescoping adjustment
- Powder coated gold finish
- Infinite net height adjustment from 6' to 8'
- Extruded design provides minimal deflection
- Worm gear winch holds cable at any tension without locking devic
- Removable winch handle
- 10-year limited warranty
APPS-1WP–Competition volleyball standards
complete with post pads, 92 lbs.
APPS-1C–Competition volleyball center standard, 40 lbs.
APPS-1CWP–Competition volleyball center standard complete with pad, 52 lbs. APPSP–Complete Package: 1 pair of competition standards complete with pads, 1 competition net, 6 Quick-Tite™ net draw straps, 2 official antennas, 2 official markers, 1 judges stand complete with pads, 160 lbs.
COURTSPORTS - PV - 35A ALUMINUM STANDARDS
- Extruded aluminum design
- Sliding locking collars provide precise net height adjustment
- Worm gear winch holds cable at any tension without locking device
- 10-year limited warranty
- Center posts available for double or triple court construction
PV-35AWP: Competition volleyball standards complete with post pads, 87 lbs.
PV35A-C: Competition volleyball center standard, 35 lbs.
PV35A-CWP: Competition volleyball center standard complete with pad, 52 lbs.
PV35A-P: Complete Package–1 pair of competition standards complete with pads, 1 competition net, 6 Quick-Tite™ net draw straps, 2 official antennas, 2 official markers, 1 judges stand complete with pads, 160 lbs.
COURTSPORTS - FLOOR SLEEVE WITH BRASS COVER: GS-35
- 3.562 ID D.O.M. steel tubing sleeve
- Solid brass hinged cover plate
- Fits wood or synthetic floors
- Machine sanded to prevent player from slipping when volleyball not in use
- Available in swivel type also
COURTSPORTS - JUDGE PLATFORM: AJP
- Portable folding stand constructed of 1" square steel tubing
- Fully padded, meets all NCAA and NFHS standards
- Wide, comfortable platform, 18"x24"
- Durable powder coated finish
- Convenient wheels for transport
COURTSPORTS - JUDGE PLATFORM: AJP
- Conveniently attached to volleyball post
- Fully padded, meets all NCAA and NFHS standards
- Fits all Aalco volleyball standards
- Also available to fit 3" posts
Accessories
- Heavy-duty net with 20 oz. vinyl pockets and strong 1" dowel rod
- Quick-Tite™ pull strap
- Antenna line marker with simple velcro attachment
- Fiberglass 2 piece antennas
COURTSPORTS - ATR VOLLEYBALL TRANSPORTER RACK
- The cart most often preferred by volleyball coaches across the country
- Holds 2 complete volleyball systems, including judges stand and all accessories
- Can be customized to hold 3 complete systems
- Features 2 net winders
- All-welded construction
- Non-marring casters
- Padded supports will not scratch poles
- Separate compartment for antennas
- 5-year warranty
COURTSPORTS - SLIM LINE POST PADS: EP-1
- 1" thick high-density foam filler
- 14 oz. vinyl covered
- Simple velcro attachment
- Meets all NCAA and NFHS regulation
MISCELLANEOUS EQUIPMENT
COURTSPORTS - ALUMINUM BADMINTON STANDARDS: BM-A
- Unique aluminum design
- Posts weigh only 15 lbs.
- BN-10 heavy-duty badminton net
- Complete with floor sleeves
- Available with adapter to fit any sleeve
GYMNASIUM DIVIDER CURTAINS
COURTSPORTS - TOP ROLL DIVIDER CURTAIN: TRU-110
- Top Roll design similar to a roll-up window shade
- Rolls within 18" of most structures
- 6 5/8" OD light wall roll tube for even material storage
- 10" wide rollers with ball-bearing assistance
- Heavy-duty stationary 1 hp motors
- Heavy-duty 19 oz.
- Gray or white
________________________________________________________________________________________________
COURTSPORTS - FOLD-UP DIVIDER CURTAIN: MODEL VSCM
- Most widely used curtain in the industry
- Heavy-duty 1 hp instant reversing motor
- Cable system conveniently folds curtain in accordion fashion
- Drive shaft can be cable or chain suspended to fit any building condition
- Raises within 24" of ceiling attachment
- Heavy-duty 19 oz. solid polyester reinforced coated vinyl fabric
- Gray or white 6 oz. polyester coated mesh construction on upper portion
- Available with any Aalco Control Station or Key Switch Operated
________________________________________________________________________________________________
COURTSPORTS - FOLD-UP DIVIDER CURTAIN: MODEL VSCM
- Designed to fold up into any sloped or peaked ceiling
- Most widely used when volleyball interference requires more height in the center of space
- Heavy-duty 1 hp instant reversing motor with special drum allows curtain to fold into peak or slope of building
- Heavy-duty 19 oz. solid polyester reinforced coated vinyl fabric
- Gray or white 6 oz. polyester coated mesh construction on upper portion
- Available with any Aalco Control Station or Key Switch Operated
________________________________________________________________________________________________
COURTSPORTS - RADIUS FOLD-UP DIVIDER CURTAIN: VSCM-R
- An AALCO original design now standard in the industry
- Designed to allow a standard stack curtain to follow the radius of a running track
- Segment drive shaft design allows uniform stacking
COURTSPORTS - WALK DRAW CURTAIN: WDC
CUSTOM WALL PADDING - COMING SOON
FLOOR MATS - COMING SOON
BATTING CAGES - COMING SOON
BLEACHERS - COMING SOON
Many gym equipment items are customized to fit your gymnasium. Some equipment may take 2-4 weeks to fabricate and ship. Please call for pricing and questions - 877-929-6677.